Instructional Videos

Instructions (User's Manual)

Thanks for buying the SUPER DEFLATOR! We are confident you will be very satisfied with our product, thanks to its innovative design and features. In order to get the most value from your SUPER DEFLATOR, please follow these instructions closely and instruct your staff to do so on a daily usage basis. You'll wonder how you ever worked without this amazing product.

WARNING: Please keep in mind that your SUPER DEFLATOR is designed to be used ONLY with B-AIR 1.0 HP and 1.5 HP blowers. Use of the SUPER DEFLATOR on any other kind of equipment is expressively forbidden. The SUPER DEFLATOR is a meticulously engineered product that was conceived to be used specifically in the way that it was designed to. Please follow these instructions closely for maximum results.

ASSEMBLY

1. Turn off and unplug the blower.
2. Remove all screws from the yellow screen on the side.
3. Remove the yellow screen from the blower.
4. Attach the SUPER DEFLATOR to the side of the blower using the screws included with the package.
5. After attaching the SUPER DEFLATOR to the blower, make sure all the screws have been securely tightened.
6. Once the SUPER DEFLATOR has been properly attached to the blower, attach the Multi-directional vacuum head to the SUPER DEFLATOR.
Assembly is now complete!

IMPORTANT: The Super Deflator permanently attaches to your B-Air blower. The Multi-directional vacuum head can be removed and attached only when needed for use in the deflation process.

INSTRUCTIONS FOR USE

1. Position the Multi-Directional Vacuum Head directly in front of the unit that is ready to be deflated.
2. Insert the Multi-Directional Vacuum Head into the vinyl tube attached to the inflatable unit or any zippered opening intended for deflation until it’s inserted 85% into the inflatable unit as shown in the diagram.
3. Make sure all the remaining zippers are closed before starting the deflation process.
4. Turn the power on, close the Air Pressure Controller and the deflation process will begin. Full deflation will take place in a drastically shorter period of time.
5. Once the unit is 95% deflated, adjust the Air Pressure Controller slightly, to avoid overworking the blower.
6. After deflation is completed, turn off the blower and remove it from the inflatable unit.
7. Begin folding the inflatable immediately after deflation is complete.

ATTENTION: Due to the natural air suction tendency through the seams of the inflatable unit, the rolling process must start immediately after removing the SUPER DEFLATOR from the unit.

IMPORTANT: Do not use the SUPER DEFLATOR on any kind of inflatable water game!”

Download the User's Manual (PDF File)

User’s Manual English

Copyright ©2006 SUPER DEFLATOR. All Rights Reserved. Design by visibledesign.com